Our Technical Specification
Technical Specification (Floor Tiles)
Characteristic |
Standard as per ISO-13006/EN14411 Group B1a |
Benchmark Value |
Test Method |
Regulatory Properties |
Deviation in Length & Width |
± 0.5% |
± 0.3% |
ISO-10545-2 |
Deviation in Thickness |
± 5.0% |
± 4.0% |
ISO-10545-2 |
Straightness in Side |
± 0.5% |
± 0.1% |
ISO-10545-2 |
Rectangularity |
± 0.6% |
± 0.1% |
ISO-10545-2 |
Surface Flatness |
± 0.5% |
± 0.2% |
ISO-10545-2 |
Color Difference |
Unfiltered |
No Change |
ISO-10545-16 |
Structural Properties |
Water Absorption |
< 0.50% |
< 0.05% |
ISO-10545-3 |
Apparent Density |
> 2.0 g/cc |
> 2.10 g/cc |
DIN 51082 |
Massive Mechanical Properties |
Modulus of Rupture |
Min. 35 N/mm² |
Min. 40 N/mm² |
ISO-10545-4 |
Breaking Strength |
Min. 1300 N |
Min. 1800 N |
ISO-10545-4 |
Impact Resistance |
As per mfg. |
Min. 0.55 |
ISO-10545-5 |
Surface Mechanical Properties |
Resistance to Surface Abrasion (PEI Rating) |
As per mfg. |
Min. Class-3 |
ISO-10545-7 |
MOH's Hardness |
As per mfg. |
Min. 5 |
EN 101 |
Thermo Hygrometric Properties |
Frost Resistance |
No Damage |
No Damage |
ISO-10545-12 |
Thermal Shock Resistance |
No Damage |
No Damage |
ISO-10545-9 |
Moisture Expansion |
Nil |
Nil |
ISO-10545-10 |
Thermal Expansion (COE) |
Max. 9.0x10-6 |
Max. 6.5x10-6 |
ISO-10545-8 |
Crazing Resistance |
As per mfg. |
Min. 10 Cycle |
ISO-10545-11 |
Chemical Properties |
Chemical Resistance |
No Damage |
No Damage |
ISO-10545-13 |
Stain Resistance |
Class 3 |
Class 5 |
ISO-10545-14 |
Safety Properties |
Slip Resistance |
As per mfg. |
> 0.40 |
ISO-10545-17 |
Fire Resistance |
As per mfg. |
Fireproof |
N.A. |
Lead & Cadmium Given Off by Glazes Tiles |
As per mfg. |
Does not yield Pb & Cd |
ISO-10545-15 |
Packing Details
Size |
600x600 MM |
Pieces / Box |
04 Pcs. |
Area / Box |
1.44 sq. mtr. |
Weight / Box (approx.) |
27 kg |
Technical Specification (Slab Tiles)
Characteristics |
Standard as per ISO-13006/EN14411 Group B1a |
Mean Value of PVT |
Mean Value of GVT |
Test Method |
Regulatory Properties |
Deviation in Length & Width |
± 0.5% |
± 0.1% |
± 0.1% |
ISO-10545-2 |
Deviation in Thickness |
± 5.0% |
± 4.0% |
± 4.0% |
ISO-10545-2 |
Straightness in Side |
± 0.5% |
± 0.1% |
± 0.1% |
ISO-10545-2 |
Rectangularity |
± 0.6% |
± 0.1% |
± 0.1% |
ISO-10545-2 |
Surface Flatness |
± 0.5% |
± 0.2% |
± 0.2% |
ISO-10545-2 |
Color Difference |
Unaltered |
No Change |
No Change |
ISO-10545-16 |
Glossiness |
As per mfg. |
Min. 90% |
Min. 4% |
Glossometer |
Surface Mechanical Properties |
Water Absorption |
< 0.50% |
< 0.05% |
< 0.05% |
ISO-10545-3 |
Apparent Density |
> 2.0 g/cc |
> 2.10 g/cc |
> 2.10 g/cc |
DIN 51082 |
Massive Mechanical Properties |
Modulus of Rupture |
Min. 35 N/mm² |
Min. 40 N/mm² |
Min. 40 N/mm² |
ISO-10545-4 |
Breaking Strength |
Min. 1300 N |
Min. 2000 N |
Min. 2000 N |
ISO-10545-4 |
Impact Resistance |
As per mfg. |
Min. 0.55 |
Min. 0.55 |
ISO-10545-5 |
Surface Mechanical Properties |
Surface Abrasion Resistance |
As per mfg. |
Min. Class-3 |
Min. Class-4 |
ISO-10545-7 |
MOH’s Hardness |
As per mfg. |
Min. 4 |
Min. 5 |
EN 101 |
Thermo Hygrometric Properties |
Frost Resistance |
No Damage |
No Damage |
No Damage |
ISO-10545-12 |
Thermal Shock Resistance |
No Damage |
No Damage |
No Damage |
ISO-10545-9 |
Moisture Expansion |
Nil |
Nil |
Nil |
ISO-10545-10 |
Thermal Expansion (COE) |
Max. 9.0x10-6 |
Max. 6.5x10-6 |
Max. 6.5x10-6 |
ISO-10545-8 |
Crazing Resistance |
As per mfg. |
Min. 10 Cycle |
Min. 10 Cycle |
ISO-10545-11 |
Chemical Properties |
Chemical Resistance |
No Damage |
No Damage |
No Damage |
ISO-10545-13 |
Stain Resistance |
Resistant |
Resistant |
Resistant |
ISO-10545-14 |
Safety Properties |
Slip Resistance |
As per mfg. |
0.40 |
0.40 |
ISO-10545-17 |
Fire Resistance |
As per mfg. |
Fireproof |
Fireproof |
N.A. |
Lead & Cadmium Given Off by Glazed Tiles |
As per mfg. |
Doesn't yield Pb & Cd |
Doesn't yield Pb & Cd |
ISO-10545-15 |
Cutting Specifications
Cutting with Disk
In order to do a correct cutting into one slab 12mm (1/2") it is recommended the use of segmented cutting disks and specifications as described below:
Disk Diameter |
RPM |
Cutting Speed (m/min - feet/min) |
300 mm - 12" |
2600 rpm |
1/2 m/min - 4 feet/min |
350 mm - 14" |
2300 rpm |
1/2 m/min - 4 feet/min |
400 mm - 16" |
1900 rpm |
1/2 m/min - 4 feet/min |
To ensure correct finishes, it is recommended lowering the speed of the band to 25%, 20 m/min - 1 feet/min. If the cutting also requires beveling it is also recommended to slow the speed in the cutting path to ensure the correct finish.
In order to avoid stress into the slab, it is imperative the use of cutting surfaces that are perfectly leveled and good disk refrigeration. The disk must have a direct application to the cutting edge with refrigeration liquid or water during all the operation.
For inner cutting, as it has been said before, is mandatory the prior drilling at the corners to ensure a 5mm - 3/16" radius. Therefore, the drill must have 10 mm - 6/16" diameter or more.
Water Jet Cutting
Before starting the waterjet cutting it is advisable to secure the surface and check the flatness of the slab on the support structure for cutting.
Unless necessary (Ex. to create a cavity), the cut must begin and finish outside the slab, always respecting 50 mm - 2" of perimeter during the cutting to avoid accumulation of stresses. The pressure should not exceed 4000 bar and the linear cutting speed should be around 0.6 m/min - 2 feet/min.
As long as the technical capacity of the cutting machines allows it, it is advisable to finish all the cuts towards the edge of the slab and avoid all the 3mm/s in the central area of the slab.
Cutting Stresses
In order to minimize the residual stresses in a slab it is advisable, regardless of the cutting method employed, to remove 25 mm - 1" from the total perimeter of the slab.
This not only mitigates the future stresses but also eliminates all possible stress that the material has accumulated during its manufacture, handling, or transport until is finally done any operation into the slab.
TECHNICAL SPECIFICATION (Parking Tiles)
Characteristic |
Standard as per ISO-13006/EN 14411 Group B1a |
Mean Value of Ceramic Polished GVT |
Mean Value of Ceramic GVT/PGVT |
Test Method |
Regulatory Properties |
Deviation in length & width |
±0.5% |
±0.1% |
±0.1% |
ISO-10545-2 |
Deviation in thickness |
±5.0% |
±4.0% |
±4.0% |
ISO-10545-2 |
Straightness in side |
±0.5% |
±0.1% |
±0.1% |
ISO-10545-2 |
Rectangularity |
±0.6% |
±0.1% |
±0.1% |
ISO-10545-2 |
Surface flatness |
±0.5% |
±0.2% |
±0.2% |
ISO-10545-2 |
Color difference |
Unaltered |
No change |
No change |
ISO-10545-16 |
Glossiness |
As per mfg |
Min 90% |
Min 4% |
GLOSSOMETER |
Structural Properties |
Water absorption |
< 0.50% |
< 0.20% |
< 0.20% |
ISO-10545-3 |
Apparent density |
> 2.0 g/cc |
> 2.10 g/cc |
> 2.10 g/cc |
DIN 51082 |
Massive Mechanical Properties |
Modulus of rupture |
Min. 35 N/mm2 |
Min. 40 N/mm2 |
Min. 40 N/mm2 |
ISO-10545-4 |
Breaking strength |
Min. 1300 N |
Min. 2000 N |
Min. 2000 N |
ISO-10545-4 |
Impact resistance |
As per mfg |
Min. 0.55 |
Min. 0.55 |
ISO-10545-5 |
Surface Mechanical Properties |
Surface abrasion resistance |
As per mfg |
Min. Class-3 |
Min. Class-4 |
ISO-10545-7 |
MOH’s hardness |
As per mfg |
Min. 4 |
Min. 5 |
EN 101 |
Thermo Hygrometric Properties |
Frost resistance |
No damage |
No damage |
No damage |
ISO-10545-12 |
Thermal shock resistance |
No damage |
No damage |
No damage |
ISO-10545-9 |
Moisture expansion |
Nil |
Nil |
Nil |
ISO-10545-10 |
Thermal expansion (COE) |
Ax. 9.0 x 10-6 |
Max. 6.5 x 10-6 |
Max. 6.5 x 10-6 |
ISO-10545-8 |
Crazing resistance |
As per mfg |
Min. 10 Cycle |
Min. 10 Cycle |
ISO-10545-11 |
Chemical Properties |
Chemical resistance |
No damage |
No damage |
No damage |
ISO-10545-13 |
Stain resistance |
Resistant |
Resistant |
Resistant |
ISO-10545-14 |
Safety Properties |
Slip resistance |
As per mfg |
>0.40 |
>0.40 |
ISO-10545-17 |
Fire resistance |
As per mfg |
Fireproof |
Fireproof |
N/A |
Lead & Cadmium given off by glazed tiles |
As per mfg |
Doesn’t yield Pb & Cd |
Doesn’t yield Pb & Cd |
ISO-10545-15 |
Packing Details
Sr. No. |
Size (in mm) |
Packing |
Coverage Area |
Thickness |
Weight |
1 |
400x400 mm |
5 Pcs |
0.805 sq.mtr./8.61 sq.ft. |
12 mm |
19 Kg Approx. |
Disclaimer: Prospective customers are advised to inspect a sample of the tile before ordering. Every effort has been made to ensure the accuracy of the information given. However, the company reserves the right to change the specifications without prior notice. Some variation in shade or size inherent to ceramic industry may occur. Before fixing, please refer to and follow the fixing instructions on the cartons of the tiles as no responsibility can be accepted by the company once the tiles have been fixed.
TECHNICAL SPECIFICATION (Elevation Tiles)
Product |
High Depth Elevation Tiles |
Size |
300x450mm, 30x45cm, 12x18 Inch |
No. Of Tiles |
5 Pcs |
Coverage Area |
0.67 sq.mtr, 7.5 sq.ft (Approx) |
Weight |
10.5 Kgs (Approx) |
Thickness |
9.0 To 11.0 mm |
Material |
Waterproof |
Box |
3 Ply |
Pattern |
Random Tiles |